18.2.13 Sprite Character Display - Fujitsu MB91319 Series Hardware Manual

CHAPTER 18 OSDC

18.2.13 Sprite Character Display

Sprite characters are displayed on the top layer. The OSDC supports sprite display of
only graphic characters.
■ Sprite Character Configuration
Figure 18.2-59 shows an example of displaying sprite characters.
Sprite character
■ Sprite Character Display Control
❍ Sprite character output control
Table 18.2-36 shows the sprite character output control of screen output control 1 (command 5-
0): Bit SDS.
Table 18.2-36 Sprite Character Output Control
SDS
0
1
❍ Sprite character code
Sprite character control 1 (Command 8-1): Bits SM11 to SM0
Set SM1 = 0, SM0 = 0.
Note:
Only the L size of graphic characters can be used as sprite characters.
538
Figure 18.2-59 Sprite Character Display Example
Sprite character output
OFF
ON