Table of Contents
Advertisement
Notes:
• When graphic color/trimming color replace control is on (bit GFC is set to 1), transparent color
control is on (bit TCC of transparent color control [command 6-2] is set to 1), and the color to be
replaced by the graphic color/trimming color and transparent color (bits TC3 to TC0) of
transparent color control (command 6-2) are the same, priority is given to replacement by
trimming color.
• When graphic color/trimming color replace control is on (bit GFC is set to 1), transparent color
control is on (bit TCC of transparent color control [command 6-2] is set to 1), and the trimming
color (bits LF3 to LF0) of line control data set 1 (command 3) and the transparent color (bits TC3
to TC0) of transparent color control (command 6-2) are the same, priority is given to the
transparent color and the lower-layer color is displayed.
• When graphic color/character color replace control is on (bit GCC is set to 1) and graphic color/
trimming color replace control is on (bit GFC is set to 1), set the difference colors for the color
replaced by the character color (bits GC3 to GC0) and the color replaced by the trimming color
(bits GF3 to GF0).
■ Graphic Color/Character Color Replace Control (Setting for Each Screen)
Table 18.2-20 shows the graphic color/character color replace control of graphic color control
(command 6-3): Bit GCC.
This control replaces any color (color specified in bits GC3 to GC0) in a graphic character by the
character color (bits MC3 to MC0) set by character data set 1 (command 1).
Table 18.2-20 Graphic Color/Character Color Replace Control (Setting for Each Screen)
GCC
0
1
Graphic color/character color replace control
The specified color is not replaced.
The specified color is replaced by the character color.
CHAPTER 18 OSDC
505
Advertisement
Table of Contents
