Fujitsu MB91319 Series Hardware Manual page 494

CHAPTER 18 OSDC
*2: Horizontal display position
The horizontal display position is several dot clocks (details are undefined) after the sync pulse
significant edge (controlled by bit HE of command 13-1) of the horizontal sync signal (HSYNC pin
input signal).
The calculation for the set value of horizontal display position in the sprite character is as follows.
Set value of horizontal display position = (SX10, SX9, SX8, SX7, SX6, SX5, SX4, SX3) × 12
Notes:
• However, setting of (SX2, SX1, SX0) = (1,1,0) or (1,1,1) is prohibited.
• See "18.2.13 Sprite Character Display".
• Display output of display signal outputs (RGB, VOB1, and VOB2) are off during the specified
period after input of the sync pulse of the vertical sync signal (VSYNC pin input signal) and the
sync pulse of the horizontal sync signal (HSYNC pin input signal.
472
+ (SX2, SX1, SX0) × 2 [dot]