Table of Contents
Advertisement
■ System Configuration of AF220/AF210/AF120/AF110 Flash Micro-controller Programmer
(Yokogawa Digital Computer Corporation)
Type
AF220/AC4P
AF210/AC4P
Main
body
AF120/AC4P
AF110/AC4P
AZ221
AZ210
FF201
AZ290
/P8
/E6
/E12
Inquiries: Yokogawa Digital Computer Corporation
Telephone number: +81-42-333-6224
■ Oscillation Clock Frequency
For the write operations on flash memory, the oscillation clock that can be used is 10 MHz.
■ Other Precautionary Information
The port state for flash memory writing via a serial programmer is the same as the reset state
except the pin used at write operation.
Model with built-in Ethernet interface /100 V to 220 V power adapter
Standard model /100 V to 220 V power adapter
Model with built-in single key Ethernet interface /100 V to 220 V power adapter
Single key model /100 V to 220 V power adapter
Programmer dedicated RS232C cable for PC/AT
Standard target probe (a) length: 1 m
Fujitsu FR flash micro-controller control module
Remote controller
8 MB PC Card (Option) FLASH memory capacity of up to 1 MB supported
4 MB PC Card (Option) FLASH memory capacity of up to 2 MB supported
8 MB PC Card (Option) FLASH memory capacity of up to 6.75 MB supported
CHAPTER 20 SERIAL PROGRAMMING CONNECTION
Function
667
Advertisement
Table of Contents
