Table of Contents
Advertisement
18.2.9.8
Transparent/Translucent Color Control
Transparent/translucent color control allows display of the color on the lower layer than
any display color. Translucent color control outputs the translucent display period to
allow translucent color processing to be executed externally.
■ Transparent Color Control (Setting for Each Screen)
Table 18.2-24 shows the transparent color control using [command 6-2]: Bit TCC.
Table 18.2-24 Transparent Color Control (Setting for Each Screen)
TCC
0
1
Figure 18.2-42 shows an example of setting a transparent color using transparent color control
(command 6-2): Bits TC3 to TC0 (if the areas with the darkest color shown below are set as a
transparent color).
Transparent color control
Disable transparent color control.
Enable transparent color control.
CHAPTER 18 OSDC
511
Advertisement
Table of Contents
