Fujitsu MB91319 Series Hardware Manual page 577

■ Field Correction Control
❍ Field correction control
Field correction control converts the display status of the even raster display field of the font to be
display the field detection control and the add raster display field. If normal display output to each
field is not performed (the output field is abnormal) in interlaced display output mode, corrects the
display output.
The synchronous control (command 11-0): the field correction control of the FC bit can be
allowed replacement of the output to each field.
Table 18.3-14 shows the field 0 correction control (FC) of synchronous control (command 11-0).
Table 18.3-14 Field Correction
FC
0
1
Field correction
No correction
Correction
CHAPTER 18 OSDC
555