Table of Contents
Advertisement
[bit3] BUSY
This bit is a flag that indicates A/D conversion is in progress.
0
A/D conversion is not in progress.
1
A/D conversion is in progress.
[bit2] Don' Care
The read value of this bit is always 0.
[bit1] INT
This bit is the A/D conversion end flag.
0
No conversion, or conversion is in progress.
1
Conversion is completed.
[bit0] INTE
This bit is the A/D conversion interrupt enable bit.
When INT and INTE are both set to 1, an interrupt request is generated.
0
Interrupt is disabled.
1
Interrupt is enabled.
CHAPTER 12 10-BIT A/D CONVERTER
243
Advertisement
Table of Contents
