■ Capture Mode
• TxR (Timer total control register)
MD:
• TxTCR (Timer setting register)
TCS:
CINV:
• TxDRR (Timer compare data register)
D15-0:
• TxCCR (Capture control register)
CPIE:
CPIS:
CPST:
CPED:
CPMD: Set the capture mode (Free-run, upper compare mode)
• TxLPCR (Low-pass filter control register)
FxEN:
FCx1, 0: Set the bit width of digital filter (Only if CPIA is selected and FEN =1)
Set to "10"
Set the count-up cycle
Select the external clock edge (Only if the external clock is selected by TCS)
Set the upper limit value of the capture (Only if CPMD = 1)
Interrupt output enable/disable by compare match
Select CPIA, CPIB
Select the capture start factor edge
Select the capture end factor edge
Select using of the filter circuit or not (Only if CPIA is selected)
CHAPTER 7 MULTIFUNCTION TIMER
183