Startup Saved-Configuration - Huawei Quidway S3900 series Command Manual

Command Manual – Configuration File Management
Quidway S3900 Series Ethernet Switches-Release 1510

1.1.7 startup saved-configuration

Syntax
startup saved-configuration cfgfile [ backup | main ]
undo startup saved-configuration [ unit unit-id ]
View
User view
Parameter
cfgfile: Path name or file name of a configuration file in the Flash, a string comprising 5
to 56 characters. Note that the current configuration file is saved in the root directory of
the Flash.
backup: Specifies the configuration file to be the primary configuration file.
main: Specifies the configuration file to be the secondary configuration file.
unit unit-id: Specifies the unit ID of a switch.
Description
Use the startup saved-configuration command to specify a configuration file to be the
primary configuration file or the secondary configuration file.
Use the undo startup saved-configuration command to specify a switch to start
without loading the configuration file.
If you execute the startup saved-configuration command with neither the backup nor
the main keyword specified, the configuration file identified by the cfgfile argument is
specified as the primary configuration file.
If the unit keyword is not provided, the undo startup saved-configuration command
will specify all the devices in the stack fabric to start without loading the configuration
profile. You can cross-the-switch specify a unit in the fabric to start without loading the
configuration file.
Caution:
To make a switch to start without loading the configuration file, do not execute the save
command after executing the undo startup saved-configuration command.
Related command: display startup.
Huawei Technologies Proprietary
1-15
Chapter 1 Configuration File Management
Commands