Huawei Quidway S3900 series Command Manual page 68

Command Manual – VLAN
Quidway S3900 Series Ethernet Switches-Release 1510
View
Any view
Parameter
vlan-id: ID of the specific VLAN interface.
Description
Use the display interface Vlan-interface command to display the information about
the VLAN interface, including:
Physical state and link state of the VLAN interface
Format of the sent frames
MAC address, IP address and subnet mask of the VLAN interface
Description string and MTU of the VLAN interface
If the vlan-id argument is specified, the information about the specified VLAN interface
is displayed; if the vlan-id argument is not specified, the information about all the
created VLAN interfaces is displayed.
Related command: interface Vlan-interface.
Example
# Display the information about Vlan-interface 2.
<Quidway> display interface Vlan-interface 2
Vlan-interface2 current state : DOWN
Line protocol current state : DOWN
IP Sending
00e0-fc07-4101
Internet Address is 10.1.1.1/24 Primary
Description : Vlan-interface2 Interface
The Maximum Transmit Unit is 1500
Table 1-1 Description on the fields of the display interface Vlan-interface command
Vlan-interface2 current state
Line protocol current state
IP Sending Frames' Format
Hardware address
Internet Address
Description
Frames' Format is
Field
Huawei Technologies Proprietary
1-2
Chapter 1 VLAN Configuration Commands
PKTFMT_ETHNT_2, Hardware
Description
Current state of the VLAN interface
Current state of the Line protocol
Format of the frames that IP sends
MAC address corresponding to the VLAN
interface
IP address corresponding to the VLAN
interface
Description on the VLAN interface
address is