Configuring The Attributes Of A Local User - Huawei Quidway S3100 Series Operation Manual

Operation Manual – AAA&RADIUS
Quidway S3100 Series Ethernet Switches
Operation
Set
assignment mode to
integer
Set
assignment mode to
string
Create a VLAN and
enter its view
Set the
VLAN name
Caution:
In string mode, if the VLAN ID assigned by the RADIUS server is a character string
containing only digits (for example, 1024), the switch first regards it as an integer
VLAN ID: the switch transforms the string to an integer value and judges if the value
is in the valid VLAN ID range; if it is, the switch adds the authenticated port to the
VLAN with the value as the VLAN ID (VLAN 1024, for example).
To implement dynamic VLAN deliver on a port where both MSTP and 802.1x are
enabled, you must set the MSTP port to an edge port.

1.4.2 Configuring the Attributes of a Local User

When local scheme is chosen as the AAA scheme, you should create local users on
the switch and configure the relevant attributes.
The local users are users set on the switch, with each user uniquely identified by a user
name. To make a user who is requesting network service pass through the local
authentication, you should add an entry in the local user database on the switch for the
user.
Table 1-9 Configure the attributes of a local user
Enter system view
Add a local user and enter
local user view
the VLAN
vlan-assignment-mode
integer
the VLAN
vlan-assignment-mode
string
vlan vlan_id
assigned
name string
Operation
system-view
local-user user-name
Huawei Technologies Proprietary
Chapter 1 AAA&RADIUS Configuration
Command
By
assignment mode is integer.
You can select between this
operation
operation.
—
This operation is required if the
VLAN assignment mode is set
to string.
Command
1-15
Description
default, the
and the
Description
—
Required
By default, there is no local
user in the system.
VLAN
above