Protocol-Based Vlan Configuration Commands; Display Protocol-Vlan Interface - Huawei Quidway S3900 series Command Manual

Command Manual – VLAN
Quidway S3900 Series Ethernet Switches-Release 1510
System View: return to User View with Ctrl+Z.
[Quidway] vlan 2
[Quidway-vlan2] port Ethernet1/0/2 to Ethernet1/0/4

1.3 Protocol-Based VLAN Configuration Commands

1.3.1 display protocol-vlan interface

Syntax
display protocol-vlan interface { { interface-type interface-number [ to interface-type
interface-number ] } | all }
View
Any view
Parameter
{ interface-type interface-number [ to interface-type interface-number ] }: Specifies the
port number of the protocol to be displayed. If you do not use the to keyword, only one
port is specified. If you use the to keyword, multiple contiguous ports are specified. The
interface-type argument refers to the port type and the interface-number argument
refers to the port number.
all: Displays the protocol-related information about all ports.
Description
Use the display protocol-vlan interface command to display the protocol information
and protocol indexes configured for specified ports.
Example
# Display protocol information and protocol index configured for Ethernet1/0/1 and
Ethernet1/0/2 ports.
<Quidway> display protocol-vlan interface Ethernet1/0/1 to Ethernet1/0/2
Interface: Ethernet1/0/1
VLAN ID
50
80
100
100
Interface: Ethernet1/0/2
VLAN ID
Protocol-Index
0
1
0
1
Protocol-Index
Huawei Technologies Proprietary
Chapter 1 VLAN Configuration Commands
Protocol-type
ip
ip
ip
ipx ethernetii
Protocol-type
1-10