Command Manual – Configuration File Management
Quidway S3900 Series Ethernet Switches-Release 1510
1.1.3 display startup
Syntax
display startup [ unit unit-id ]
View
Any view
Parameter
unit unit-id: Specifies the unit ID of a switch.
Description
Use the display startup command to display the startup configuration of a switch,
including the name of the current startup configuration file, the names of the primary
startup configuration file and secondary startup configuration file to be used when the
switch starts the next time, and so on.
Related command: startup saved-configuration.
Example
# Display the startup configuration of unit 1.
<Quidway>display startup unit 1
MainBoard:
Current Startup saved-configuration file:
Next main startup saved-configuration file:
Next backup startup saved-configuration file:
Bootrom-access enable state:
1.1.4 display this
Syntax
display this [ by-linenum ]
View
Any view
Parameter
by-linenum: Displays line numbers.
Huawei Technologies Proprietary
1-10
Chapter 1 Configuration File Management
NULL
flash:/123.cfg
flash:/back.cfg
enabled
Commands