Hwping Server Commands; Hwping-Server Enable - H3C s3600 series Command Manual

Related commands: password, ftp-operation.
To perform an FTP test successfully, the configured username must be consistent with the
username configured on the FTP server.
This command applies to FTP tests only.
Examples
# Configure the username for logging into the FTP server in an FTP test as administrator.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator ftp
[Sysname-hwping-administrator-ftp] test-type ftp
[Sysname-hwping-administrator-ftp] username administrator

HWPing Server Commands

A HWPing server is required for only jitter, TCP, and UDP tests.
You are not recommended to configure HWPing jitter/UDP/TCP servers on ports 1 through 1023
(well-known ports); otherwise, HWPing probes may fail or the services corresponding to these
ports may be unavailable.

hwping-server enable

Syntax
hwping-server enable
undo hwping-server enable
View
System view
Parameters
None
Description
Use the hwping-server enable command to enable the HWPing server function.
Use the undo hwping-server enable command to disable the HWPing server function.
1-27