Test-Type - H3C s3600 series Command Manual

[Sysname] hwping administrator http
[Sysname-hwping-administrator-http] test-type http
[Sysname-hwping-administrator-http] source-port 8000

test-type

Syntax
test-type type
View
HWPing test group view
Parameters
type: Test type. It can be any of the following keywords:
dhcp: Indicates a DHCP test.
dns: Indicates a DNS test.
ftp: Indicates an FTP test.
http: Indicates an HTTP test.
icmp: Indicates an ICMP test.
jitter: Analyzes the delay change of UDP packet transmission.
snmpquery: Indicates an SNMP test.
tcpprivate: Indicates a TCP test on a specified (unknown) port.
tcppublic: Indicates a TCP test on port 7.
udpprivate: Indicates a UDP test on a specified (unknown) port.
udppublic: Indicates a UDP test on port 7.
Description
Use the test-type command to configure the test type.
The default test type is icmp.
If you modify the test type, the parameter configuration, test results and history records of the original
test type will be cleared.
Examples
# Configure the test type as an FTP test.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator ftp
[Sysname-hwping-administrator-ftp] test-type ftp
1-23