Show Startup-Config - Dell Z9500 Command Reference Manual

Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
Example
Dell#show running-config
Current Configuration ...
! Version 9.2(1.0B2)
! Last configuration change at Thu Mar
default
!
boot system primary system: A:
boot system secondary system: A:
boot system default system: A:
boot system gateway 1.1.1.1
!...
Example
Dell#show running-config status
running-config checksum 0xB4B9BF03
startup-config checksum 0x8803620F
Dell#
Usage The status option allows you to display the size and checksum of the running
Information configuration and the startup configuration.

show startup-config

Display the startup configuration.
Z9500
Syntax
show startup-config
Command EXEC Privilege
Modes
74
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
6 02:10:35 2014 by
File Management