Upgrade Fpga-Image System Cpld Booted - Dell Z9500 Command Reference Manual

Related
•
Commands

upgrade fpga-image system cpld booted

Use this command to upgrade the CPLD devices in the Z9500 Route Processor and Control Processor
CPUs using the currently running Dell Networking operating-system image (and only when required by
the upgrade procedure in the Z9500 release notes).
Z9500
Syntax
upgrade fpga-image system cpld booted
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.0.0.0
8.3.1.0
7.5.1.0
Example
Dell# upgrade fpga-image system cpld booted
Current information in the system:
=================================
Card
----------------------------------------------
CP
************************************************************
* Warning - Upgrading FPGA is inherently risky and should
* only be attempted when necessary. A failure at this upgrade
may *
* cause a board RMA. Proceed with caution !
************************************************************
***********************************************************
* When the upgrade has successfully completed, the system will
be *
File Management
upgrade fpga-image system fpga booted
Z9500 CPUs.
Description
Introduced on the Z9500.
Introduced on the Z-Series.
Added the rpm option.
Introduced on the C-Series.
FPGA Name
SYSTEM CPLD
— upgrades the FPGA devices in all
Current Version
0x07 0x08
New Version
*
*
81