Pm-2; Pm-3 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
OL-15994-03
PM-3-DUP_REG_ERR Format: %s is already registered with PM
A PM client tried to register more than once with PM.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
PM-3-ERROR Format: Failed to %s
A critical operation has failed in the PM process.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
PM-3-ETH_STUB_ERR Format: %s
A failure occurred in the Ethernet stub module.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
PM-3-HA_UPDATE Format: HA update failed (%d)
HA update failed.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
PM-3-IF_INDEX Format: Invalid interface index received from %d
An invalid interface index has been received.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
PM-3-INTERNAL_ERROR Format: %s
An internal error has occurred in the PM process.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
PM-3-IPC_ERR Format: %s
A failure occurred while communicating with another process.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Cisco NX-OS System Messages Reference
PM Messages
2-497