Chapter 2
System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
restart count of [dec] too big, needs to be set to [dec].
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
replaced with [dec].
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
[chars].
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
delayed for scope [chars].
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
OL-15994-03
SYSMGR-4-PARSEWARN_RESTART_CNT_TOO_BIG: Service [chars]: [chars]
This message is for Cisco TAC debugging. This is not a problem or malfunction.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
SYSMGR-4-PARSEWARN_VALUE_TOO_SMALL: [chars]: [chars] is too small,
This message is for Cisco TAC debugging. This is not a problem or malfunction.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
SYSMGR-4-READCONF_REJECT: Discarding configuration update request:
This is a legacy message that can be igored from Cisco MDS SAN-OS release 1.3(4a).
No action is required.
SYSMGR-4-READCONF_STARTED: Configuration update started (PID [dec]).
This is a legacy message that can be igored from Cisco MDS SAN-OS release 1.3(4a).
No action is required.
SYSMGR-4-SRVSCOPE_DELAYED: Waiting for redundancy state; termination
This message is for Cisco TAC debugging. This is not a problem or malfunction.
No action is required.
SYSMGR-4-UGRP_ALL_COMPLETED: Upgrade completed for all the groups.
This is a legacy message that can be igored from Cisco MDS SAN-OS release 1.3(4a).
No action is required.
Cisco NX-OS System Messages Reference
SYSMGR Messages
2-707