SPAN Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
SPAN-2
Error Message
SPAN-3
Error Message
Error Message
manager for sys info
SPAN-5
Error Message
session
Error Message
interface [[chars]] in dir [[chars]] removed from session [[dec]].
Cisco NX-OS System Messages Reference
2-616
SPAN-2-MEM_FULL: Memory allocation failed
Memory allocation failed.
Explanation
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
SPAN-3-IPC_FAIL: IPC Error
Explanation
Internal IPC error.
No action is required.
Recommended Action
SPAN-3-SYSINFO_TIMEOUT: Span timed out waiting for response from port
Span request for critical system information from port manager timed out. So, span on
Explanation
the new active is exiting and system manager will restart Span.
No action is required.
Recommended Action
SPAN-5-ATL_VSAN_DEFAULT_ALL: Default to all VSANs for SPAN egress
Generation 2 fabric switches support only one VSAN filter for egress SPAN session. If
Explanation
no or more than one VSANs are specified, SPAN will default to use all VSANs for the egress SPAN
session.
No action is required.
Recommended Action
SPAN-5-SPAN_CFG_REJECT_SRC_VSAN_FILTER_NOT_SUPPORTED: Source
Interface level VSAN filters are not supported.
Explanation
No action is required.
Recommended Action
Chapter 2
System Messages and Recovery Procedures
OL-15994-03