Zone-4 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
not a valid zone/alias member virtual name: [chars] pwwn: [chars]
Explanation
pwwn: [chars].
Recommended Action
Error Message
received when change protocol is in progress
Explanation
The line card upgrade will occur after the completion of the change protocol.
Recommended Action
Error Message
[chars] expiry in [dec] days
Explanation
down unless a permanent license [chars2] was installed.
Recommended Action
Error Message
[chars]. Error: [chars]
Explanation
Recommended Action
OL-15994-03
ZONE-4-ZS_FC2_OPER_FAILED: FC2 [chars] operation failed : [chars]
Zone Server FC2 [chars] operation failed : [chars].
No action is required.
ZONE-4-ZS_IF_PORT_MODE_CONFLICT: Port mode conflict for if [chars]
Port mode conflict for if [chars].
Shutdown/no shutdown the interface.
ZONE-4-ZS_INVALID_FPORT_WWN_MEMBER: Virtual device fwwn: [chars] is
Virtual device fwwn: [chars] is not a valid zone/alias member, virtual name: [chars]
No action is required.
ZONE-4-ZS_LC_UPGRADE_CHANGE_IN_PROGRESS: Linecard upgrade request is
A request for line card upgrade has been received when change protocol is in progress.
No action is required.
ZONE-4-ZS_LICENSE_EXPIRY_WARNING: Feature [chars] evaluation license
Feature [chars1] will exceed its evaluation time period in [dec] days and will be shut
Install the license file to continue using the feature.
ZONE-4-ZS_MEMBER_CONVERSION_FAILED: Zone Member conversion failed for
Zone Member conversion has failed in : [chars] due to error: [chars].
No action is required.
Cisco NX-OS System Messages Reference
ZONE Messages
2-843