Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 619

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
%s()
Explanation
Parameters: Failed API, Error, Error Code, RPM Function ...
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
(0x%08x) in %s()
Explanation
Parameters: Error, Error Code, RPM Function ...
Recommended Action
Error Message
(0x%08x) in %s()
Explanation
Parameters: Error, Error Code, RPM Function ...
Recommended Action
Error Message
(0x%08x) in %s()
Explanation
Parameters: Error, Error Code, RPM Function ...
Recommended Action
Error Message
in %s()
Explanation
Parameters: Failed API, Error, Error Code, RPM Function ...
Recommended Action
Support web site http://www.cisco.com/tac.
OL-15994-03
RPM-3-LOAD_PARSE_TREE Format: %s failed with error - %s (0x%08x) - in
API failed to load parse tree for PBR commands.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
RPM-3-MTS_DROP Format: Error returned from mts_drop(), errno: %s
An MTS API returned an error when RPM tried to drop a message
No action is required.
RPM-3-MTS_RECV Format: Error returned from tsp_mts_recv(), errno: %s
An MTS API returned an error while RPM was receiving on an MTS queue
No action is required.
RPM-3-MTS_SEND Format: Error returned from mts_send(), errno: %s
An MTS API returned an error while RPM was sending an MTS message
No action is required.
RPM-3-UNLOAD_PARSE_TREE Format: %s failed with error - %s (0x%08x) -
API failed to unload parse tree for PBR commands.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Cisco NX-OS System Messages Reference
RPM Messages
2-581