Mcectest Messages - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

MCECTEST Messages

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
MCAST-2
Error Message
MCAST-4
Error Message
MCAST-5
Error Message
Error Message
MCECTEST Messages
This section contains the MCECTEST messages.
Cisco NX-OS System Messages Reference
2-384
MCAST-2-SHUTDOWN: Process shutting down: [chars]
Mcast is shutting down.
Explanation
The action depends on the situation. The multicast process can shut down
Recommended Action
gracefully because of a system restart (in which case no action needs to take place) or because of a
failure. The message associated with the syslog should be self explanatory to understand the reason
for the shutdown. If the process is able to restart properly, there is no immediate harm for the system
stability and the suggested action is to report the syslog event together with an explanation of the
operations most recently performed on the system.
MCAST-4-ERROR: [chars]
Mcast encountered a generic error.
Explanation
No action is required.
Recommended Action
MCAST-5-BAD_MSG: Received bad message: [chars]
Mcast has received a malformed/unrecognized message.
Explanation
No action is required.
Recommended Action
MCAST-5-START: Process has been started
Mcast has been started.
Explanation
No action is required.
Recommended Action
Chapter 2 System Messages and Recovery Procedures
OL-15994-03