Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 371

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
[chars].
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
committed on some switches. The reason for the failure : [chars]. Configuration can be inconsistent
in the fabric.
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
[chars].
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
device-alias commit/abort notification is not received in the expected time frame.
Explanation
started. For any reason, if device-alias commit/abort notification is not received within the expected
time frame, the lock timer gets expired and the lock is released. If device-alias commmit notification
is received after the lock is released, the changes are not applied and this could cause inconsistency
between IVR and device-alias.
Recommended Action
OL-15994-03
IVR-3-CLEAR_FAILED: [chars]
An error has occurred while clearing the lock. The reason for the failure : [chars].
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
IVR-3-COMMIT_FAILED: [chars]
An error has occurred while committing configuration. The reason for the failure :
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
IVR-3-COMMIT_PARTIALLY_FAILED: [chars]
An error has occurred while committing configuration. Configuration could not be
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
IVR-3-COMMIT_REJECTED: [chars]
Commit request received from remote switch is rejected. The reason for the failure:
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
IVR-3-DDAS_LOCK_TIMER_EXPIRED: IVR database lock is released, as
When device-alias sends the validation request, IVR database is locked and a timer is
No action is required.
Cisco NX-OS System Messages Reference
IVR Messages
2-333