Pim6 Messages - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m

PIM6 Messages

This section contains the PIM6 messages.
PIM6-2
Error Message
Error Message
PIM6-3
Error Message
Error Message
Error Message
OL-15994-03
PIM6-2-SHM_LOCK_CREAT Format: Failed to create shared memory lock: %s
The system has failed to initialize.
Explanation
Parameters: Error Name ...
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
PIM6-2-STARTUP_DEBUG Format: %s in %s
The system has failed to initialize.
Explanation
Parameters: Error, Function Name ...
No action is required.
Recommended Action
PIM6-3-ADD_ROUTE Format: Couldn't add PIM6 route %s in %s
PIM6 failed to update the local route-table entry.
Explanation
Parameters: Addresses, Function Name ...
No action is required.
Recommended Action
PIM6-3-API_CLOSE Format: Couldn't close %s API
PIM6 failed to close API opened with the component.
Explanation
Parameters: Component Name ...
No action is required.
Recommended Action
PIM6-3-API_FAILED Format: %s API failed in %s
Explanation API call has failed in PIM6.
No action is required.
Recommended Action
Cisco NX-OS System Messages Reference
PIM6 Messages
2-457