Bootvar-3 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
reason=[chars]
Error Message
reload <error-id:[hex]>
Error Message
by neighbor supervisor.
Error Message
verification failed, reason=[chars]
BOOTVAR-5
Error Message
did not start. [chars] (Error-id: [hex])
Error Message
supervisor succeed
OL-15994-03
BOOTVAR-3-LOAD_VERIFY_LIB_FAILED: Fetching library [chars] failed,
Explanation The system has failed to load bootvar that is specified in the verification library.
No action is required.
Recommended Action
BOOTVAR-3-MODULE_LOCK_FAIL: Unable to get module lock, please don't
The system is unable to acquire modlock to prevent the user to reload
Explanation
duringautosynchronization.
No action is required.
Recommended Action
BOOTVAR-3-NEIGHBOR_REJECT_AUTOCOPY: auto-copy failed - not supported
The autocopy has failed because it is not supported by the standby supervisor module.
Explanation
No action is required.
Recommended Action
BOOTVAR-3-VERIFY_FAILED: Image [chars] for bootvar [chars]
The image set for this bootvar has failed the verification process.
Explanation
Recommended Action Check reason to determine actions.
BOOTVAR-5-AUTOCOPY_DID_NOT_START: Autocopy of file [chars] to standby
An autocopy of the file could not start because the remote copy location does not exist.
Explanation
Recommended Action No action is required.
BOOTVAR-5-AUTOCOPY_SUCCEED: auto-copy of file [chars] to standby
Explanation The autocopy of the file has succeeded. The image integrity has been verified by the
standby supervisor module.
Recommended Action No action is required.
Cisco NX-OS System Messages Reference
BOOTVAR Messages
2-69