Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 474

OSPF Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
OSPF-4
Error Message
Error Message
%s
Error Message
authentication %hx
Error Message
from %s on %s
Error Message
Reason ...
Error Message
Cisco NX-OS System Messages Reference
2-436
OSPF-4-AF_NO_FUNC Format: Function %s not supported by OSPF version %s
Function is not specified for the current address family
Explanation
Parameters: Function Name, OSPF Version ...
No action is required.
Recommended Action
OSPF-4-AREA_ERR Format: Packet from %s on %s received for wrong area
A OSPF packet not belonging to this area was received
Explanation
Parameters: Source IP address, Interface name, Area ID ...
No action is required.
Recommended Action
OSPF-4-AUTH_ERR Format: Received packet from %s on %s with bad
A OSPF packet with mismatched authentication type was received
Explanation
Parameters: Source IP address, Interface name, Type ...
No action is required.
Recommended Action
OSPF-4-CKSM_ERR Format: Bad OSPF checksum in packet %hx computed %hx
A OSPF packet with invalid checksum was received
Explanation
Parameters: Checksum value, Checksum value, Source IP address, Interface name ...
Recommended Action No action is required.
OSPF-4-CLEANUP Format: OSPF is exiting, reason 0x%x ; Parameters:
OSPF has been deconfigured or restarted.
Explanation
No action is required.
Recommended Action
OSPF-4-DEST_INVALID Format: Bad destination address %s
Explanation A OSPFv3 packet with muticast source address was received
Parameters: Source IP address ...
Recommended Action No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03