Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 666

STP Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
to [dec]
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
to [chars]
Explanation
Recommended Action
Error Message
on port [chars]: Invoking pre-standard MST BPDU transmission on this port.
Explanation
automatically adjust its mode of operation on this port and will start sending pre-standard BPDUs.
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Cisco NX-OS System Messages Reference
2-628
STP-6-PORT_PRIORITY: Port [chars] instance [chars] priority changed
The spanning tree port priority has changed for the specified port.
No user action is required.
STP-6-PORT_ROLE: Port [chars] instance [chars] role changed to [chars]
The spanning tree port role has changed for the specified port.
No user action is required.
STP-6-PORT_STATE: Port [chars] instance [chars] moving from [chars]
The Spanning-Tree port has changed its state.
No user action is required.
STP-6-PRESTD_NEIGH: This switch has received a pre-standard MST BPDU
The switch has received a pre-standard MST BPDU on a port. The switch will
No user action is required.
STP-6-ROOT: Root bridge for [chars] changed to [chars]
The spanning tree root bridge has changed.
No user action is required.
STP-6-SERVICE_UP: Initialized [chars]
STP line 2.
No action is required.
STP-6-STATE_CREATED: Internal state created [chars]
STP has created its internal state stateless/stateful [chars].
No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03