Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 286

ICMPV6 Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
ICMPV6-6
Error Message
reserve-limit for interface %s
Error Message
for interface %s
Error Message
Cisco NX-OS System Messages Reference
2-248
ICMPv6-3-TLV_TO_STRUCT Format: TLV to Struct Conversion failed (%d)
TLV to Struct conversion failed.
Explanation
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
ICMPv6-3-TXLIST_CREATE Format: Couldn't create txlist for %s
ICMPV6 has failed to create a txlist resource.
Explanation
Parameters: Data type ...
Recommended Action Dump core, and then restart component.
ICMPv6-3-VRF_CREATE Format: ICMPv6 VRF creation failed for vrf %s
ICMPv6 process could not create the VRF context.
Explanation
Parameters: VRF name ...
Dump core, then reload the stack.
Recommended Action
ICMPv6-6-RESERVE_LIMIT_WARNING Format: Exceeded 80% of the
Exceeded 80% of the reserve-limit for the interface
Explanation
Parameters: Interface ...
No action is required.
Recommended Action
ICMPv6-6-STATE_LIMIT_WARNING Format: Exceeded 80% of the state-limit
Exceeded 80% of the state-limit for the interface
Explanation
Parameters: Interface ...
No action is required.
Recommended Action
ICMPv6-6-UNKNOWN_OPC Format: Received unknown mts opcode %d
ICMPv6 process received unknown Interprocess message, dropped.
Explanation
Recommended Action No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03