Chapter 2
System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error:[chars]
Error Message
while running the RewriteEngineLoopback test. Error:[chars]. Module:[dec] could
have gone offline
DIAG_PORT_LB-5
Error Message
Error Message
DIAGCLIENT Messages
This section contains the DIAGCLIENT messages.
OL-15994-03
DIAG_PORT_LB-3-VLAN_ERROR: [chars]([dec]) [chars] Error:[chars]
Port Loopback test process failed to get Diagnostic VLAN information.
Explanation
No action is required.
Recommended Action
DIAG_PORT_LB-3-VQI_GET_FAIL: Failed to get the Diag VQi from XBM.
The Rewrite Engine Loopback test has failed to get the Diag VQi from XBAR Mgr.
Explanation
No action is required.
Recommended Action
DIAG_PORT_LB-3-XBM_CFG_REQ_FAIL: Failed to conigure the XBAR mask
The Rewrite Engine Loopback test has failed to set the XBAR mask while running the
Explanation
test. The target module could have gone offline.
No action is required.
Recommended Action
DIAG_PORT_LB-5-DIAG_PORT_LB_DISABLED: DIAG_PORT_LB Disabled
DIAG_PORT_LB service has been disabled.
Explanation
No action is required.
Recommended Action
DIAG_PORT_LB-5-DIAG_PORT_LB_ENABLED: DIAG_PORT_LB Enabled
DIAG_PORT_LB Service nabled.
Explanation
No action is required.
Recommended Action
DIAGCLIENT Messages
Cisco NX-OS System Messages Reference
2-119