Ips_Sb_Mgr-Slot#-6; Ipsec Messages - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
is not compatible with current node image
Error Message
not compatible with system image

IPS_SB_MGR-SLOT#-6

Error Message

IPSEC Messages

This section contains the IPSEC messages.
IPSEC-2
Error Message
Error Message
to IP ACL [chars] bound to crypto map [chars] [dec]
OL-15994-03
IPS_SB_MGR-SLOT#-4-NODE_NOT_COMPAT_WITH_CURRENT: svc-node[dec] image
Explanation The new svc image is not compatible with the svc image currently running on the node.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
IPS_SB_MGR-SLOT#-4-NODE_NOT_COMPAT_WITH_SUP: svc-node[dec] image is
Explanation The svc image on the node is not compatible with the supervisor image.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
IPS_SB_MGR-SLOT#-6-SBMGR_EVENT: Sbmgr event: [chars]
This is an event log of sb_mgr relating to a port/node.
Explanation
Recommended Action No action is required.
IPSEC-2-IPSEC_INIT: IPSec initialization of [chars] [chars]
IPSec initialization has failed.
Explanation
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
IPSEC-2-IPSEC_SPD_OVERFLOW_DUE_TO_ACL: SPD Overflow on interface due
Explanation Modifying IP ACL caused Security Policy Database on the interface to overflow, IP
ACL filter not applied to security policy database.
Recommended Action Undo IP ACL change.
Cisco NX-OS System Messages Reference
IPSEC Messages
2-299