Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 523

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Interface
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
policy trigger
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
[chars] policy trigger
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
could not be obtained. Please visit
http://wwwin-tools-stage.cisco.com/SWIFT/SLT/viewSltHome.do to purchase licenses
Explanation
Recommended Action
Support web site http://www.cisco.com/tac to obtain a license.
Error Message
vem slots are in use
Explanation
Recommended Action
command. In the configuration mode, remove any unused hosts using the 'no vem <module>'
command to free up VEM slots.
Error Message
module)
Explanation
Recommended Action
OL-15994-03
PLATFORM-2-PFM_SYSTEM_RESET: Manual system restart from Command Line
User initiated a system reload from the CLI.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
PLATFORM-2-PFM_SYSTEM_RESET_TRIGGER: System restart due to [chars]
Policy/trigger initiated a system reload.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
PLATFORM-2-PFM_SYSTEM_SHUTDOWN_TRIGGER: System shutdown due to
Policy/trigger initiated a system shutdown.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
PLATFORM-2-PFM_VEM_DEFAULT_LICENSES_DEPLETED: License for VEM [dec]
Only 4 VEMs can be licensed for a period of 90 days with default licenses.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
PLATFORM-2-PFM_VEM_DENY: Host [chars] cannot be inserted because all
All VEM slots have been allocated to hosts and a new host has been added to the DVS.
You can see the host/module mappings using the 'show module vem mapping'
PLATFORM-2-PFM_VEM_REMOVE_MOD_FAIL: Removing VEM [dec] (failed
The system has detected that a VEM has been removed because the module failed.
No action is required.
PLATFORM Messages
Cisco NX-OS System Messages Reference
2-485