Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 680

SVC Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
[chars]
Error Message
slot [dec]: [chars]
Error Message
[chars], vsan [dec] internal error: [chars]
SVC-4
Error Message
SS_EID_CA_EV_FIRST_DATA_PINNED ) Customer data pinned [chars]
Error Message
SS_EID_CA_EV_HWS_TO_SYNCHRONOUS ) Cache in write through mode due to pinned data
[chars]
Cisco NX-OS System Messages Reference
2-642
SVC-3-SVC_SYSLOG_IF_INTERNAL_ERROR: Interface [chars] internal error:
Explanation SVC interface internal error.
No action is required.
Recommended Action
SVC-3-SVC_SYSLOG_LC_INTERNAL_ERROR: Unable to send MTS to linecard in
Linecard MTS failure.
Explanation
No action is required.
Recommended Action
SVC-3-SVC_SYSLOG_NPORT_INTERNAL_ERROR: [chars] N-port for Interface
N-port internal error.
Explanation
No action is required.
Recommended Action
SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec]
There is now pinned customer data. This warning is given when data is pinned and there
Explanation
wasn't already pinned data. Error log entries will exist for the underlying cause of the pinned data.
Perform problem determintation on the error log to determine the cause of the
Recommended Action
pinned data and correct.
SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec]
The cache must now operate in write through mode because of the amount of pinned
Explanation
data.
Perform problem determintation on the error log to determine the cause of the
Recommended Action
pinned data and correct.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03