Rip-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

RIP Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
RIP-3
Error Message
Error Message
Error Message
Error Message
with RIP interface %p (iod %d)
Error Message
Cisco NX-OS System Messages Reference
2-568
RIP-3-AUTH_SEND_FAILURE Format: %s %s
The RAn IP process has failed to send a message to a neighbor
Explanation
Parameters: Failure Reason, Interface Name ...
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
RIP-3-FAILURE Format: Failed to %s
A critical operation has failed in the RIP process
Explanation
Parameters: Event ...
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
RIP-3-GENERIC Format: %s
Explanation An error has occurred
Parameters: Error ...
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
RIP-3-IM_DEL Format: IOD in IM delete message for %s (%d) mismatches
Explanation There is a mismatch of interface IODs in IM and RIP
Parameters: Interface Name, Interface ID, Interface Name, Interface ID ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
RIP-3-INTERNAL_ERROR Format: %s
An internal error has occurred in the RIP process
Explanation
Parameters: Error ...
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03