Chapter 2
System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation: IS-IS has been signaled to exit.
Error Message
Error Message
ISNS Messages
This section contains the ISNS messages.
ISNS-2
Error Message
Error Message
IVR Messages
This section contains the IVR messages.
OL-15994-03
ISIS-6-SYSMAN_CLEANUP Format: Terminated by SYSMAN cleanup signal ;
Explanation
The system has detected an error.
No action is required.
Recommended Action
ISIS-6-UNK_NLPID Format: Unrecognized NLP ID %02X from %s%s
IS-IS has received a packet with an NLPID which it does not recognize. The packet will
Explanation
be dropped.
Parameters: NLP Id, Interface Name, Source Destination Addr ...
Recommended Action
No action is required.
ISIS-6-UNK_PDU Format: Unrecognized PDU type %d from %s%s
IS-IS has received a packet of a type which it does not recognize. The packet will be
Explanation
dropped.
Parameters: PDU Type, Source Addr, Destination Addr ...
No action is required.
Recommended Action
ISNS-2-ISNS_CFS_OPERATION_FAILED: iSNS CFS [chars] failed
ISNS CFS operation failed.
Explanation
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
ISNS-2-ISNS_INIT: iSNS initialization of [chars] [chars]
ISNS initialization has failed.
Explanation
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
Cisco NX-OS System Messages Reference
ISNS Messages
2-327