Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 425

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
MODULE-2
Error Message
[dec]
Error Message
SAP [chars]
Error Message
[hex] for SAP [dec]
Error Message
[hex] for SAP [dec]
Error Message
SAP [chars]
Error Message
failure [chars] due to [chars] in device [dec] (device error [hex])
OL-15994-03
MODULE-2-LCM_PRE_UPGRADE_GENERAL_FAIL: Pre upgrade message fails seq
Pre upgrade message failed.
Explanation
Recommended Action No action is required.
MODULE-2-LCM_UPGRADE_DONE_GENERAL_FAIL: Upgrade done message fails
Explanation Upgrade ready message failed.
No action is required.
Recommended Action
MODULE-2-LCM_UPGRADE_OVER_FAIL: Upgrade over message returned [dec]
Upgrade done message failed.
Explanation
No action is required.
Recommended Action
MODULE-2-LCM_UPGRADE_READY_FAIL: Upgrade ready message returned [dec]
Upgrade ready message failed.
Explanation
No action is required.
Recommended Action
MODULE-2-LCM_UPGRADE_READY_GENERAL_FAIL: Upgrade ready message fails
Upgrade ready message failed.
Explanation
Recommended Action No action is required.
MODULE-2-MOD_DIAG_FAIL: Module [dec] (serial: [chars]) reported
Explanation The module in slot [decimal digit] reported a failure in the runtime diagnostic. Module
manager is going to power cycle the module.
Collect information about the module by issuing the command 'show module
Recommended Action
internal all module [decimal digit]'.
Cisco NX-OS System Messages Reference
MODULE Messages
2-387