Radius-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
RADIUS-3
Error Message
RADIUS-5
Error Message
Error Message
[dec] and acct-port [dec] status has changed from [chars] to [chars]. Server was
in previous-state for [chars], and total dead time of the server is [chars]
RADIUS-6
Error Message
Error Message
OL-15994-03
RADIUS-2-RADIUS_PROGRAM_EXIT: RADIUS daemon exiting: [chars]
RADIUS daemon is exiting.
Explanation
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
RADIUS-3-RADIUS_ERROR_MESSAGE: [chars]
RADIUS Error Message.
Explanation
No action is required.
Recommended Action
RADIUS-5-RADIUS_MONITOR_STATUS: [chars] [chars]
Notifying RADIUS server monitor status change.
Explanation
No action is required.
Recommended Action
RADIUS-5-RADIUS_SERVER_STATUS: [chars] server [chars] with auth-port
Notifying RADIUS server status change.
Explanation
Recommended Action No action is required.
RADIUS-6-RADIUS_ACCOUNTING_MESSAGE: [chars]
This message indicates that this is an accounting message.
Explanation
Recommended Action No action is required.
RADIUS-6-RADIUS_MESSAGE: [chars]
RADIUS Message.
Explanation
Recommended Action No action is required.
Cisco NX-OS System Messages Reference
RADIUS Messages
2-555