Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 68

ARP Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
Error Message
Error Message
ARP-3
Error Message
%s on %s
Cisco NX-OS System Messages Reference
2-30
ARP-2-SYSMGR_UUID Format: Failed to get uuid from sysmgr during %s
An unrecoverable software error has occurred during ARP initialization.
Explanation
Use 'reload' command to reload the system. Be aware that this problem affects
Recommended Action
all VDCs on the system.
ARP-2-THR_CREAT Format: Failed to create thread %s: error %d
An unrecoverable software error has occurred during ARP initialization.
Explanation
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
ARP-2-THREAD_FAIL Format: Failed to start %s thread
An unrecoverable software error has occurred during ARP initialization.
Explanation
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
ARP-2-TIMER_SET Format: Failed to initialize new timer set
An unrecoverable software error has occurred during ARP initialization.
Explanation
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
ARP-2-TIMERS_INIT Format: Failed to initialize timers
An unrecoverable software error has occurred during ARP initialization.
Explanation
Use 'reload' command to reload the system. Be aware that this problem affects
Recommended Action
all VDCs on the system.
ARP-3-ADJ_ADD Format: Failed to add adjacency for received packet from
Due to this failure, packet forwarding to this address will be affected until the next
Explanation
successful retry.
No action is required.
Recommended Action
Chapter 2 System Messages and Recovery Procedures
OL-15994-03