Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 857

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
WWN-3
Error Message
Error Message
Error Message
Error Message
Error Message
Error Message
OL-15994-03
WWN-3-PSS_SYNC_TO_STNDBY_FAILED: PSS TYPE=[chars] KEY=[chars]
Could not send PSS Sync. notification to Standby Supervisor. PSS Type=[str.]
Explanation
Operation=[.str] Key=[Str.].
No action is required.
Recommended Action
WWN-3-RELEASE_ERR: Cant Rel. WWN [chars]
WWN Manager received a request to release a WWN that cannot be released.
Explanation
No action is required.
Recommended Action
WWN-3-RELEASE_ERR_UNKNOWN: Unknown WWN [chars] [chars]
WWN Manager received a request to release a WWN [char] that could not have been
Explanation
allocated by this WWN Manager due to [char].
No action is required.
Recommended Action
WWN-3-STARTUP_COPY_TO_RUNNING_FAILED: [chars]
Could not snapshot Startup-Config PSS to Running-Config. The description of the error
Explanation
is [str.].
No action is required.
Recommended Action
WWN-3-TOOMANY_REQ_REL: WWNs [chars] = [dec] > MAX LIMIT 1024 - Denied
The WWN Manager received a request to allocate [dec] WWN, which is more than the
Explanation
maximum number of WWNs that can be allocated/released in a single request.
No action is required.
Recommended Action
WWN-3-UNKNOWN_MSG: Received from Node=[dec] SAP=[dec] Opcode=[dec]
The WWN Manager has received an unknown message from [dec]].[dec] with opcode
Explanation
[dec]. This information is for debugging only.
No action is required.
Recommended Action
Cisco NX-OS System Messages Reference
WWN Messages
2-819