Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 522

PLATFORM Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Command Line Interface
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Command Line Interface
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Command Line Interface
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
[dec] is disabled due to incompatible platform
Explanation
Recommended Action
Error Message
(Version-[dec]) needs to be upgraded
Explanation
Recommended Action
Error Message
powerup
Explanation
Recommended Action
Cisco NX-OS System Messages Reference
2-484
PLATFORM-2-PFM_MODULE_POWER_ON: Manual power-on of [chars] from
User initiated a module power-on from the CLI.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
PLATFORM-2-PFM_MODULE_POWER_ON: Manual power-on of Module [dec] from
User initiated a module power-on from the CLI.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
PLATFORM-2-PFM_MODULE_RESET: Manual restart of Module [dec] from
User initiated a module reload from the CLI.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
PLATFORM-2-PFM_NETBOOT_DISABLE: Netboot for supervisor module in slot
Standby supervisor failed to power up.
Try to replace the standby supervisor.
PLATFORM-2-PFM_PWR_MGMT_EPLD_VER_MISMATCH: Module [dec] Pwr Mgmt Epld
Using a wrong version of Epld version can result in unexplainable behavior.
Upgrade Power Managment EPLD.
PLATFORM-2-PFM_STDBY_POWERUP_FAIL: standby supervisor failed to
Standby supervisor failed to power up.
Try to replace the standby supervisor.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03