Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 775

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
failed for pid %d
Explanation
leak over period of time.
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
%d, new client: \%s\, pid: %d
Explanation
Recommended Action
Error Message
client: \%s\, pid %d
Explanation
Recommended Action
Error Message
%d error %s
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
OL-15994-03
TCP-3-NOMEM Format: %s: malloc failed for: %s
No system resources.
Use 'reload' command to reload the system. Be aware that this problem affects
TCP-3-PROCTERM_NOTIFY Format: %s: Termination notification request
Request for process termination notification has failed. This could lead to TCP memory
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
TCP-3-SM_CREATE Format: %s: Shared memory \%s\ create failed, error %d
No system resources.
Use 'reload' command to reload the system. Be aware that this problem affects
TCP-3-SOCKET_COLL Format: %s: Socket collision, old client: \%s\, pid:
Two clients selected on the same socket.
No action is required.
TCP-3-SOCKET_COLL_FOUND Format: %s: Socket collision found for
Two clients selected on the same socket.
No action is required.
TCP-3-SOCREATE Format: %s: socreate create failed for client \%s\ pid
Cannot create socket. See errorno for details Reload software if no memory.
Use the 'restart' command to restart the feature and clear this problem.
TCP-3-TCP_MTS_DROP Format: Error returned from mts_drop(), errno: %s
TCP called an MTS API which returned an error.
No action is required.
Cisco NX-OS System Messages Reference
TCP Messages
2-737