Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 878

ZONE Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
(expected [chars], got [chars])
Explanation
version [chars].
Recommended Action
Error Message
Reason: Hard zoning disabled
Explanation
failure.
Recommended Action
Error Message
Hard zoning disabled
Explanation
failure.
Recommended Action
Error Message
Reason: [chars]
Explanation
Recommended Action
Error Message
Reason: Hard zoning disabled
Explanation
failure.
Recommended Action
Error Message
: Reason: Hard zoning disabled
Explanation
failure.
Recommended Action
Cisco NX-OS System Messages Reference
2-840
ZONE-2-ZS_PSS_VER_MISMATCH: PSS version mismatch URL: [chars]
Configuration version mismatch. PSS URL [chars]. Expected version [chars], stored
Upgrade/Downgrade to expected version.
ZONE-2-ZS_TCAM_BROADCAST_ZONE_DISABLED: Broadcast zoning disabled :
Broadcast zoning disabled : Reason: Hard zoning disabled due to TCAM programming
No action is required.
ZONE-2-ZS_TCAM_LUN_ZONING_DISABLED: LUN zoning disabled : Reason:
LUN zoning disabled : Reason: Hard zoning disabled due to TCAM programming
No action is required.
ZONE-2-ZS_TCAM_PROGRAMMING_FAILED: TCAM operation failed : [chars],
TCAM Programming failure has occurred : [chars]. [chars] is the reason for failure.
No action is required.
ZONE-2-ZS_TCAM_READ_ONLY_ZONE_DISABLED: Read-only zoning disabled :
Read-only zoning disabled : Reason: Hard zoning disabled due to TCAM programming
No action is required.
ZONE-2-ZS_TCAM_SWITCHED_TO_SOFT_ZONING_MODE: Switched to soft zoning
Switched to soft zoning : Reason: Hard zoning disabled due to TCAM programming
No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03