Port-Channel Messages; Port-Channel-1 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

PORT-CHANNEL Messages

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
up for reason: [chars] ([hex])
Error Message
module [dec]: reason [chars] ([hex])
Error Message
oversubscription failed for module [dec]
PORT-CHANNEL Messages
This section contains the PORT-CHANNEL messages.

PORT-CHANNEL-1

Error Message
[[chars]]
Cisco NX-OS System Messages Reference
2-520
PORT-5-IF_TRUNK_UP: Interface [chars], vsan [chars] is up
The interface [chars] is trunking, VSAN [chars] is up.
Explanation
No action is required.
Recommended Action
PORT-5-IF_UP: Interface [chars] is up [chars]
Explanation The interface is up in the mode specified, if applicable.
No action is required.
Recommended Action
PORT-5-MODULE_BRINGUP_NOT_ALLOWED: Not allowing module [dec] to come
Module is not allowed to be operational due to the current system state.
Explanation
Use command show module <x> recovery-steps and follow the steps
Recommended Action
descRIBed.
PORT-5-MODULE_INDEX_RESTORE_ERROR: Error in restoring indices for
The restoration of the module index may fail due to overlap of indices.
Explanation
No action is required.
Recommended Action
PORT-5-MODULE_UNLIMITED_OSM_SEQ_FAILED: Enable/Disable of unlimited
Interfaces of the module may be in indeterminate state.
Explanation
Recommended Action Reload the module.
PORT-CHANNEL-1-LC_CFG_FAILURE: configuring module [dec] failed
Module configuration failed.
Explanation
Module will be automatically reset.
Recommended Action
Chapter 2 System Messages and Recovery Procedures
OL-15994-03