Icmpv6 Messages - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Grp [dec] Standby router priority changed to [dec]
Error Message
Error Message
[chars]
Error Message
timer changed to [dec] [chars]
Error Message
virtual ip address [chars]

ICMPV6 Messages

This section contains the ICMPV6 messages.
ICMPV6-2
Error Message
%s()
OL-15994-03
HSRP_ENGINE-6-STANDBYROUTERPRIORITYCHANGE: Interface [chars] [chars]
Explanation The priority of the Standby router for the group has changed.
No action is required.
Recommended Action
HSRP_ENGINE-6-STATECHANGE: [chars] Grp [dec] state move to [chars]
The router has changed its state.
Explanation
No action is required.
Recommended Action
HSRP_ENGINE-6-STATECHANGE2: [chars] Grp [dec] state moving from
The router has changed its state.
Explanation
No action is required.
Recommended Action
HSRP_ENGINE-6-TIMER: Interface [chars] [chars] Grp [dec] [chars]
The hello/hold timer value for the HSRP group has changed.
Explanation
Recommended Action No action is required.
HSRP_ENGINE-6-VIPLEARN: Interface [chars] [chars] Grp [dec] learnt
Explanation The local router has learned virtual ip address from the incoming HSRP packet.
No action is required.
Recommended Action
ICMPv6-2-MALLOC_FAILED Format: malloc() failed for allocating %s in
ICMPv6 process is out of heap memory. This could be due to temporary increase in the
Explanation
number of static or dynamic Neighbor Cache Entries(NCEs) to a very high value.
No action is required.
Recommended Action
Cisco NX-OS System Messages Reference
ICMPV6 Messages
2-243