Rscn Messages - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

RSCN Messages

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
RPM-6
Error Message
%s is ignored in %s()
Error Message
opcode %d, dropping it in %s()
Error Message
command in %s()
RSCN Messages
This section contains the RSCN messages.
RSCN-2
Error Message
Error Message
Cisco NX-OS System Messages Reference
2-582
RPM-6-LIB_MATCH_IGNORED Format: The command %s in seq. %u of route-map
A route-map match command has been igored.
Explanation
Parameters: Match Command, Seq No., Route-map, RPM Function ...
No action is required.
Recommended Action
RPM-6-MTS_UNKNOWN_MSG Format: Received unknown MTS message with
RPM received an unknown message. The message is dropped
Explanation
Parameters: MTS Opcode, RPM Function ...
Recommended Action No action is required.
RPM-6-RESTART_SHUTDOWN Format: RPM shutting self down via restart
RPM process is shutting itself down due to the restart command.
Explanation
Parameters: RPM Function ...
Recommended Action No action is required.
RSCN-2-FC2_FAILED: RSCN FC2 operation failed: [chars]: [chars]
RSCN FC2 operation failed: [chars] [chars].
Explanation
No action is required.
Recommended Action
RSCN-2-INIT_FAILED: RSCN Init failed: [chars]
Explanation RSCN Init failed: [chars].
No action is required.
Recommended Action
Chapter 2 System Messages and Recovery Procedures
OL-15994-03