Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 476

OSPF Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
reached - %d prefixes
Explanation
configured by mistake
Parameters: Number of prefixes ...
Recommended Action
Error Message
been reached - %d prefixes
Explanation
configured by mistake
Parameters: Number of prefixes ...
Recommended Action
Error Message
command
Explanation
Recommended Action
Error Message
Explanation
configured with the same router ID or a router which was disconnected from the network has come
back.
Parameters: Context, Message ...
Recommended Action
Error Message
Explanation
Parameters: IP address, Interface name ...
Recommended Action
Error Message
on %s
Explanation
Parameters: Source IP address, Interface name ...
Recommended Action
Cisco NX-OS System Messages Reference
2-438
OSPF-4-REDIST_MAX_PFX Format: Redistribution prefix limit has been
Check if redistRIBution of large number of prefixes is desired and has not been
No action is required.
OSPF-4-REDIST_THR_PFX Format: Redistribution prefix threshold has
Check if redistRIBution of large number of prefixes is desired and has not been
No action is required.
OSPF-4-RESTART_SHUTDOWN Format: OSPF shutting self down via restart
OSPF process is shutting itself down due to the restart command.
No action is required.
OSPF-4-SELF_LSA Format: context %s: %s
Router received a newer copy of an LSA generated by itself. Two routers may be
Verify if the router ID for the router is unique in the network.
OSPF-4-SOURCE_ERR Format: Bad source address %s - ours on %s
A OSPF packet with our own source address was received
No action is required.
OSPF-4-SRC_INVALID Format: Invalid src address %s, should not be seen
A OSPF packet packet with source address not on this network was received
No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03