Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 97

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
operator intervention needed: %s
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
operation: %s, id %lu
Explanation
Parameters: Operation, Attr ID ...
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
id %lu
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
failed
Explanation
out of memory.
Parameters: VRF name, Address-family, Table name ...
Recommended Action
configuration to decrease memory requirements. Clear any BGP peers that may have been shut down
automatically. If BGP has available memory, restart BGP.
Error Message
Operation - %s, Error - %s\n
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
OL-15994-03
BGP-3-SOFTINCAP Format: Peer %s not capable of soft refresh in,
The router is unable to do a soft refresh for the indicated peer.
If necessary, reset the connection with the peer.
BGP-3-SRAND Format: Failed to set random seed
An unrecoverable error has occurred during BGP initialization.
Use the 'restart' command to restart the feature and clear this problem.
BGP-3-TBLATTRAVL_OP Format: Failed table attribute database
BGP was unable to perform a table attribute database operation
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
BGP-3-TBLAVL_OP Format: Failed table database operation: %s, table %s
BGP was unable to perform a table database operation.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
BGP-3-TBLCTX_INIT Format: VRF %s, %s, table %s: Table initialization
BGP was unable to initialize an internal datastructure. The BGP process may have run
If BGP ran out of memory, add memory to the router or change the network
BGP-3-THREAD_SHUTDOWN Format: Problem shutting down thread %s:
An unexpected but recoverable event has occurred.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Cisco NX-OS System Messages Reference
BGP Messages
2-59