Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 413

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
M6RIB-2
Error Message
%s, create: %s
Error Message
%s()
Error Message
M6RIB-3
Error Message
m6rib_main()
Error Message
OL-15994-03
M6RIB-2-API_INIT_SEM Format: Failed to init the client API semaphore:
M6RIB could not create the semaphore that protects access to the shared memory
Explanation
between M6RIB and its clients.
Parameters: Operation, Error from the operation ...
Use 'reload' command to reload the system. Be aware that this problem affects
Recommended Action
all VDCs on the system.
M6RIB-2-RES_MGR Format: Error returned from %s, errno: 0x%08x (%s) in
The resource manager returned an error to M6RIB, while M6RIB was performing an
Explanation
action relating to its shared memory
Parameters: RM Function, Error Code, Error Description, Calling Function ...
Use 'reload' command to reload the system. Be aware that this problem affects
Recommended Action
all VDCs on the system.
M6RIB-2-STARTUP_FAILURE Format: Startup failure: %s
Explanation An unrecoverable software error has occurred during M6RIB startup.
Use 'reload' command to reload the system. Be aware that this problem affects
Recommended Action
all VDCs on the system.
M6RIB-3-ACTIVE_TIMER_FAILED Format: active_timer_create() failed for
The M6RIB process has failed to create a timer.
Explanation
Dump core, then reload the stack.
Recommended Action
M6RIB-3-API_FAILED Format: %s failed
The M6RIB process has failed in invoking an API.
Explanation
Parameters: Function ...
Recommended Action No action is required.
Cisco NX-OS System Messages Reference
M6RIB Messages
2-375