Bgp-4 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

BGP Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
queue
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Parameters: Queue name, MTS Opcode ...
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
%d
Explanation
Parameters: Queue name, MTS Opcode ...
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
%s due to no memory
Explanation
Parameters: Address-family, Prefix/masklength, Peer address ...
Recommended Action
Error Message
Explanation
Recommended Action
after any change.
Error Message
configured limit %d
Explanation
Parameters: Address-family, Peer, Prefix limit ...
Recommended Action
after any change.
Cisco NX-OS System Messages Reference
2-62
BGP-4-MQUNEXPECT Format: Recieved unexpected message (%d/%d) on %s
An unexpected but recoverable event has occurred.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
BGP-4-MTSNOMSG Format: No MTS payload found on %s queue, opc %d
An unexpected but recoverable event has occurred.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
BGP-4-MTSUNKOPC Format: Recieved unknown MTS message on %s queue, opc
An unexpected but recoverable event has occurred.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
BGP-4-NODAMPMEM Format: [%s] Unable to dampen prefix %s/%d from peer
BGP_EXPL_NO_MEMORY
No action is required.
BGP-4-NORID Format: Peer %s sent us 0.0.0.0 as its router-id
A BGP peer sent us an invalid router ID.
Check that the peer router is configured correctly. Clear the peer if necessary
BGP-4-PFXEXCEED Format: [%s] No. of prefix received from %s exceeded
A peer sent more routes than BGP was configured to accept.
Check that the peer router is configured correctly. Clear the peer if necessary
Chapter 2 System Messages and Recovery Procedures
OL-15994-03