Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 458

NPV Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
NPV-4
Error Message
Error Message
NPV-5
Error Message
at Line [dec]
Error Message
been automatically assigned to interface [chars]
Error Message
has been manually assigned to interface [chars]
Cisco NX-OS System Messages Reference
2-420
NPV-3-UNLOCK_FAILED: [chars]
An error has occurred while releasing the lock. The reason for the failure : [chars].
Explanation
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
NPV-4-NPV_NPIV_NOT_ENABLED_ON_UPSTREAM_SWITCH: [chars]
The external interface has failed to come because the NPIV feature is not enabled on
Explanation
the upstream switch.
Verify and enable NPIV feature in upstream switch.
Recommended Action
NPV-4-NPV_PORT_VSAN_MISMATCH_ON_UPSTREAM_LINK: [chars]
The external interface has failed to come because the upstream port VSAN has a
Explanation
mismatch with the upstream switch.
Make sure the port VSAN is the same on both sides of this external link.
Recommended Action
NPV-5-ASSERTION_FAILED: Unexpected assertion failure in File [chars]
An assertion has failed in NPV code.
Explanation
No action is required.
Recommended Action
NPV-5-FLEXATTACH_VPWWN_AUTO_ASSIGNED: A virtual port WWN [chars] has
The virtual port WWN will be used as port WWN for devices logging in on this
Explanation
interface.
No action is required.
Recommended Action
NPV-5-FLEXATTACH_VPWWN_MANUALLY_ASSIGNED: A virtual port WWN [chars]
The virtual port WWN will be used as port WWN for devices logging in on this
Explanation
interface.
No action is required.
Recommended Action
Chapter 2 System Messages and Recovery Procedures
OL-15994-03